|
A2comdet Nos.627,627D,632,632D
Thank you for purchasing NAPCO's new GEM-ACM1D Access Control Accessory. The GEM-ACM1D is an
accessory that adds access control functionality to the GEM-X255, GEM-P9600 and GEM-P3200 control panels.
The GEM-ACM1D provides controlled access to a door by releasing a magnetic lock or electric strike
when a proper proximity card is presented to the card reader.
The GEM-ACM1D access control panel resides on the GEM-X255, GEM-P9600 or GEM-P3200 system bus
and uses a keypad location in the system for communication. Like the keypad, the GEM-ACM1D can be
used to arm and disarm the system, and is capable of controlling door access, monitoring door status and annunciating
troubles and alarms.
The GEM-ACM1D works with any standard Wiegand card reader and any UL294 Listed door lock, however,
the recommended reader is the HID Prox Point model 6005B-00. The NAPCO standard 36 bit proximity card
and the HID standard 26 bit proximity card formats are both supported.
Up to four (4) GEM-ACM1D modules may be connected to a GEM-P9600 or GEM-X255 control panel, and
two (2) GEM-ACM1D modules may be connected to a GEM-P3200. The GEM-ACM1D can support up to two
card readers using an optional plug-in GEM-2D module. Each card reader can be programmed to function
independently on different doors.
|