Model 3000 & Access 4000 Securitel-SpreadNet Interface Cable
This cable is designed to connect a Securitel Serial STU or C&K Systems SpreadNet Receiver to a Port on a 3000 / Access 4000 UART Interface board.
Before the Securitel/SpreadNet cable can be used, one of the following UART board options must be fitted to the Control Module:
- 993065 3000/4000 Single Port UART
- 993066 3000/4000 Dual Port UART
- 993068 3000/4000 Four Port UART
If fitting the UART board follow the installation instructions carefully, ensuring that the Control Module is powered down and battery disconnected before the UART is fitted.
