G5900
The Dictograph G5900 Control-Commmunicator is a fully programmable device with remote
communication and control capabilities. The panel can handle up to sixteen fully programmable
zones.
Each G5900 control panel can contain up to eight liquid crystal display (LCD) keypads (model
G5800LCD) providing a two line English language readout.
The G5900 system can also be setup in a partitioned configuration. Partitioning allows the panel
to look like as many as eight different protected locations to the Central Station. Each partition will
be assigned zones, users and keypads. The account numbers transmitted for each partition are
definable. Partitions can be setup to protect diff erent functional areas of the same location (example,
office area vs, warehouse) or different premises within close proximity (example, shopping center
or multi family complex).
Programming of the G5900 panel can be accomplished either through the G5800LCD keypad,
EZ-MATE PC Based Downloader (model 7700), or EZ- MATE Programmer( model 7150 with the
71 60 Programming cartridge).
Remote functions can be performed from a the Alarm Company location using a dedicated
EZ-MATE Programmer or the EZ-MATE PC Based Downloader.
The G5900 maintains a record of the past 126 events that occurred within the system. This System
Activity Log can be viewed by an installer through an LCD keypad, or transferred automatically to a
remote printer on either a daily weekly or monthly basis.
This manual describes the hookup and installation of the Dictograph G5900.System programming
is described in the LCD Keypad programming manual (F12685).
