DS 150i Request To Exit PIR Motion Detector
. The DS150i is a Passive Infrared Detector U.L. Listed as an Access Control
Device under U.L. 294 standard. It is designed for "request to exit"
applications.
. The relay output consists of two Form "C" contacts that can be adjusted to
latch from approximately 0.25 to 60 seconds. The latch time features two
modes of operation: resettable (R) and non-resettable (NR). The relay can
also be programmed to fail safe or fail secure in the event of a power loss.
. The DS150i may be mounted on the ceiling or the wall, and its pattern may
be aimed and/or masked for more effective use based on installation needs.
It is not designed as a primary means of exit for emergency egress applications.
. The DS150i is available in a light grey (DS150i) or a black (DS151i) enclosure.
