Type drx 400-II Operation
The drx400 requires all connections to the PCB to be made by the installer These connections
are: power, video in, video out, and pan or auxiliary outputs.
See Table for the correct connections.
The drx400 is normally supplied pre-configured to suit the application for which it is intended, and
this will be to control either a mains-operated pan & tilt head plus housing, or to control a 24-volt
pan & tilt head plus housing. The unit is suitable for 230 volt mains operation. As a factory fitted
option, the receiver can be supplied to operate from 24Va.c. or 110Va.c. This option must be
specified at time of order.
