FA426
The FA426 Wireless Receiver allows you to add up to 16 Inovonics FA series transmitters to the keypad
data bus of an XR20 Command ProcessorT panel. The FA426 mounts in the panel enclosure and connects
to the keypad data bus terminals using a Model 300 Wire Harness supplied with the module.
An Inovonics FA116 Programmer is used to program the wireless points. The FA116 must contain firmware
version 1.50 or higher to operate properly with the FA426 Receiver. If you have an earlier version firmware,
please contact Inovonics Technical Support at (800) 782-2709 for assistance in upgrading. FA116
Programmers purchased after August 1, 1996 will contain version 1.50 or higher.
