716
The 716 Output Expander Module provides four independently programmable Form C (SPDT) relays and four zone
following annunciator (open collector) outputs for use on the LX-BusT of DMP 1912XR and XR200 Command
ProcessorT Panels. You can use the 716 module in a variety of remote annunciation and control applications. In
addition to the panel's on-board Form C relays, you can connect multiple 716 modules to the panel for over 200
unique auxiliary relays and annunciator outputs (one for each zone). The 716 module connects only to the LX-Bus
of an interface card. It cannot connect to the keypad data bus.
Addressing the 716
You set the 716 module to an address that is then used by the panel to turn on and off the outputs. For easy
addressing, the 716 contains two on-board rotary switches you can set with a small screwdriver.
