ACM8 - Access Power Controller
The ACM8 access power controller is designed to be powered via one (1) common power source which will provide power for both the board operation and locking devices or two (2) totally independent power sources, one providing power for board operation and the other for the lock power.The ACM8 has eight (8) independent wet or dry access control system trigger controlled outputs. Each output will route power to a variety of access control hardware and devices which includes Mag Locks, Electric Strikes, Magnetic Door Holders, etc... These outputs will operate in both fail-safe and fail-secure modes. A form "C" dry output relay will enable Alarm Monitoring, HVAC Shutdown, Elevator Recall or trigger other auxiliary devices. The unit can be configured for the following modes; 1- Eight (8) outputs with disconnect. 2- Eight (8) outputs without disconnect and 3- Fifty/fifty mode (four (4) with and four (4) without disconnect). Each relay is provided with a red LED for ease of identification.
