Telguard SC Home Security Installation
TELGUARD SC family of cellular alarm systems enable any host control/communicator (C/C) to send its alarm signals over the cellular network to the central station. Most often TELGUARD is used to backup the host C/C's wired Telco line. If the wired line becomes inoperative, TELGUARD's built-in line fault monitor switches the host C/C's path of communication to cellular. In that mode, the C/C dials the same phone number it would have if on the wired line and sends the same alarm message once connected to the central station receiver. TELGUARD can be installed wherever cellular service is available and can transmit alarms to any location where wired phone service exists.
TELGUARD is also used extensively where no Telco service is available for transmitting all alarms exclusively over cellular. Examples of this application include moving vehicles, construction job sites and remote facilities.
Economy Model T-1610M is intended to back up host C/C or to transmit alarms exclusively over cellular where no phone service exists. It is our least expensive version. Economy Model T-1620M has all the capabilities of the T-1630M, plus the automatic self test feature. Economy Model T-1630M has all the capabilities of the T-1620, plus the ability to receive incoming calls over cellular. This enables downloading to the host C/C when the wired line is inoperative.
Standard Model T-1110M has all the capabilities of the T-1620, plus the Priority Phone for making, receiving calls over cellular using any standard phone device including computer modems and faxes. Deluxe Model T-1210M is like the T-1100M, plus it also has the CelSwitch feature for automatically switching all premise phones to cellular when the incoming phone line being used by Telguard becomes inoperative.
Underwriter's Laboratories Model T-3100UL is also available. It has features similar to T-1110M with installation requirements enabling Underwriters Laboratories Listings.
