AJ600 Home Security Installation
The AJ600 Burglar Alarm System you have purchased will provide years of protection for you home and your family provided you take care to install the alarm system correctly.
To ensure a trouble-free installation it is important to read the complete installation manual carefully before starting, and to follow each section carefully.
1. The control Panel
The AJ600 control panel is like a mini computer, by pressing the 16 keypad buttons it allows you to select, change or inhibit with ease the many facilities available in the unit.
2. The Detectors
Included in the kit are two passive infra-red detector, these operate by detecting infra-red changes in the field of detection, therefore when situated correctly provides protection against unauthorised entry to an entire area, i.e. Living Room or Hall.
The two magnetic contacts are provided to protect entry to your property through windows or doors, once fitted and the door or window is closed the magnetic contact completes a circuit if the control panel is on a door or window fitted with a magnetic contact is opened the break in the circuit will trigger an alarm. It is advisable to use one of the magnetic contacts on the main entry/ exit door.
Additional detectors can be fitted to suit any installation.
3. The External Bell Box
Once assembled the rustproof external bell-box houses the 115db maxisiren. To prevent someone deactivating the siren, the front and back temper-switch is provided (attached to RSCB), this means the siren will sound if either the front cover is removed or the whole assembly is pullled off the wall - even when the control panel is switched off. The rechargeable self-contained siren module (RSCB) monitors the power from the control panel to the siren, if the power is cut or interrupter the RSCB will sound the siren, and keep it running from its own internal power source, recharged automatically from the control panel.
